GA-MOR Machines Tools Private Limited
Mahadevapura, Bengaluru, Karnataka
GST No. 29AACCG9374L1ZW
08048970028 95% Response Rate
Send E-mail
- Home
- »
- Our Products
- »
- Pneumatic Robotic ARM Air Tapping Machine
GAMOR Machines is into Manufacturing of wide range of Tapping Machines they are Hydraulic Tapping Machine Pneumatic Tapping Machines and Servo Electric Tapping Machines
| Minimum Order Quantity | 1 Piece |
| Working Stroke | 50 |
| Material | Mild Steel |
| Drilling Capacity In Steel | Tapping |
| Functions | Tapping |
| Automation Grade | Manual |
| Layout | Vertical |
| Voltage | Pneumatic |
| Usage/Application | Tapping |
| Spindle Travel | 1900mm |
| Table Working Surface | 1900mm |
| Approx. Weight | 18kg |
| Forward Speed | 700rpm |
| Reverse Speed | 700rpm |
| Torque | 13NM |
| Chuck Size | 1B |
| Working Radius | 1900MM |
| Size | M2 - M8 |
| Tapping Speed In Aluminium | 700RPM |
| Technical Characteristics: | |||||
| TAPPING CAPACITY: | M2-M8 | ||||
| SPEED: | 700 R.P.M | ||||
| TORQUE | 12 Nm | ||||
| REQUIRED AIR PRESSURE: | 7 bar, 840 lt/min | ||||
| WEIGHT OF THE MACHINE: | 18 KG | ||||
| RADIUS WORK AREA: | R.min. 330mm, R.máx. 1900Mm | ||||
| LUBRIFICATION OF THE MOTOR: | ISO VG 32 or similar | ||||
| SERIAL EQUIPMENT: | |||||
| Pneumatic motor | |||||
| Reinforced arm structure of hard aluminium (parallelogram) | |||||
| Table attachment column | |||||
| Air filtration and motor lubrification unit | |||||
| Tap-holder quick change chuck Ø19 | |||||
| Minimum Order Quantity | 1 Piece |
| Hole Diameter | 12mm |
| Number Of Shaft | 1 |
| Material | All |
| Working Stroke | 1900mm |
| Drilling Capacity In Steel | Tapping |
| Functions | Tapping |
| Automation Grade | Manual |
| Layout | Horizontal |
| Voltage | Pneumatic |
| Usage/Application | Tapping |
| Table Working Surface | 1900mm |
| Approx. Weight | 18kg |
| Forward Speed | 400rpm |
| Reverse Speed | 400rpm |
| Floor Area Space | 1900mm |
| Torque | 33nm |
| Chuck Size | 1b |
| Hydraulic Pressure | pneumatic |
| Working Radius | 1900mm |
| Motor Wattage | Pneumatic |
| Size | M2-M12 |
| Tapping Speed In Aluminium | 400rpm |
| Power | pneumatic |
| Type | quick change |
| Technical Characteristics: | ||||||
| TAPPING CAPACITY: | M3-M12 | |||||
| SPEED: | 400 R.P.M. | |||||
| TORQUE | 32 Nm | |||||
| REQUIRED AIR PRESSURE: | 7 bar, 840 l/min | |||||
| WEIGHT OF THE MACHINE: | 20 KG. | |||||
| RADIUS WORK AREA: | R.min. 330mm, R.máx. 1900Mm | |||||
| LUBRIFICATION OF THE MOTOR: | ISO VG 32 or simmilar | |||||
| SERIAL EQUIPMENT: | ||||||
| Pneumatic motor | ||||||
| Reinforced arm structure of hard aluminium (parallelogram) | ||||||
| Table attachment column | ||||||
| Air filtration and motor lubrification unit | ||||||
| Tap-holder quick change chuck Ø19 | ||||||
| Material | Mild Steel |
| Functions | Tapping |
Pneumatic engine GAMOR, serie A.
Reinforced arm structure of hard aluminum (parallelogram).
Table attachment column.
Air filter.
Tapping chuck 31.
Set of 6 tap holders with safety clutch for M5, M6, M8, M10, M12, M16.
CAPACITY M3-M16
SPEED 300 RPM
WORK RANGE max 1400mm - min 200mm
WORKING PRESSURE 7 bar - 840 lt/min
WEIGTH 16 Kg.
Vertical / Horizontal tapping.
Mooring magnet.
Tap cooling equipment.
Centring device magnet.
*Your information is safe with us.
| Material | Mild Steel |
| Functions | Tapping |
| Hydraulic Pressure | 160 Kg /cm2 |
| Speed | 200 - 570 RPM |
We are a prominent name in between the leading companies, engaged in providing Hydraulic Tapping Machines. These Hydraulic Tapping Machines are known for their Quality, Durability, Excellence in performance. Clients can purchase these machines from us at industrial leading prices.
Tapping Capacity:
Basic Equipment: