GA-MOR Machines Tools Private Limited
Mahadevapura, Bengaluru, Karnataka
GST No. 29AACCG9374L1ZW
08048970028 86% Response Rate
Send E-mail
- Home
- »
- Our Products
- »
- Tapping Machines
| Minimum Order Quantity | 1 Piece |
| Hole Diameter | 16mm |
| Number Of Shaft | 1 |
| Material | All |
| Working Stroke | 1400mm |
| Drilling Capacity In Steel | Tapping |
| Functions | Tapping |
| Automation Grade | Manual |
| Layout | Vertical |
| Voltage | Pneumatic |
| Usage/Application | Tapping |
| Table Working Surface | 1400mm |
| Approx. Weight | 20KG |
| Forward Speed | 300rpm |
| Reverse Speed | 300rpm |
| Floor Area Space | 1400mm |
| Torque | 54nm |
| Chuck Size | 2B |
| Hydraulic Pressure | Pneumatic |
| Working Radius | 1400mm |
| Motor Wattage | Pneumatic |
| Size | M3-M16 |
| Tapping Speed In Aluminium | 300rpm |
| Power | Pneumatic |
| Type | Quick change |
| Technical Characteristics: | ||||||
| TAPPING CAPACITY: | M3-M16 | |||||
| SPEED: | 300 R.P.M. | |||||
| TORQUE | 54 Nm | |||||
| REQUIRED AIR PRESSURE: | 8 bar, 940 l/min | |||||
| WEIGHT OF THE MACHINE: | 25 KG. | |||||
| RADIUS WORK AREA: | R.min. 200mm, R.máx. 1400mm | |||||
| LUBRIFICATION OF THE MOTOR: | ISO VG 32 or simmilar | |||||
| SERIAL EQUIPMENT: | ||||||
| Pneumatic motor | ||||||
| Reinforced arm structure of hard aluminium (parallelogram) | ||||||
| Table attachment column | ||||||
| Air filtration and motor lubrification unit | ||||||
| Tap-holder quick change chuck Ø31 | ||||||
| Optional Accessories Quote will send as per customer request | ||||||
| Minimum Order Quantity | 1 Piece |
| Working Stroke | 1950mm |
| Drilling Capacity In Steel | Tapping |
| Functions | Tapping |
| Automation Grade | Manual |
| Layout | Horizontal |
| Voltage | Pneumatic |
| Usage/Application | Tapping |
| Spindle Travel | 1950mm |
| Table Working Surface | 1950mm |
| Approx. Weight | 34kg |
| Forward Speed | 70rpm |
| Reverse Speed | 220rpm |
| Floor Area Space | 1950mm |
| Min. No. Of Strokes | 1 |
| Torque | 160nm |
| Chuck Size | 2B |
| Hydraulic Pressure | Pneumatic |
| Working Radius | 1950mm |
| Motor Wattage | Pneumatic |
| Size | M5-M24 |
| Tapping Speed In Aluminium | 220rpm |
| Power | Pneumatic |
| Type | Quick change |
| Technical Characteristics: | ||||||
| TAPPING CAPACITY: | M5-M24 | |||||
| SPEED: | 70/220 R.P.M. two speeds | |||||
| TORQUE | 160 Nm | |||||
| REQUIRED AIR PRESSURE: | 8 bar, 940 l/min | |||||
| WEIGHT OF THE MACHINE: | 45 KG. | |||||
| RADIUS WORK AREA: | R.min. 200mm, R.máx. 1900Mm | |||||
| LUBRIFICATION OF THE MOTOR: | ISO VG 32 or similar | |||||
| SERIAL EQUIPMENT: | ||||||
| Pneumatic motor | ||||||
| Reinforced arm structure of hard aluminium (parallelogram) | ||||||
| Table attachment column | ||||||
| Air filtration and motor lubrification unit | ||||||
| Tap-holder quick change chuck Ø31 | ||||||
| Optional Accessories Quote will send as per customer request | ||||||