GA-MOR Machines Tools Private Limited
Mahadevapura, Bengaluru, Karnataka
GST No. 29AACCG9374L1ZW
08048970028 91% Response Rate
Send E-mail
- Home
- »
- Our Products
- »
- Flexi ARM Electric & Hydraulic Tapping Machines
| Minimum Order Quantity | 1 Piece |
| Material | Steel |
| Max Force Or Load | 24 |
| Capacity | M4-M24 |
| Speed Control | Electronic |
| Speed | 120 - 380 RPM |
| Max Pressure | 160 Kg /cm2 |
| Electric Motor | 5.5 CV |
| Voltage | 380V |
| Arm Length | 550 mm |
| Quick Change Chuck | N 2 31mm |
| Oil Tank | 40 Ltr |
| Weight | 325 Kg |
We are a leading company engaged in offering Hydraulic Tapping Machines to our customers. This Hydraulic Tapping Machines is made by using quality tested components as per the set industrial norms and standards. To attain maximum satisfaction of customers, we offer this machine at industrial leading rates.
Tapping Capacity:
Tapping Capacity:
Standard Equipment:
| Minimum Order Quantity | 1 Piece |
| Drilling Capacity In Steel | NO |
| Functions | Tapping |
| Automation Grade | Semi-Automatic |
| Layout | Horizontal |
| Voltage | 230V |
| Usage/Application | Tapping on Stainless Steel Material |
| Minimum Order Quantity | 1 Piece |
| Working Stroke | 350 Min 1410 Mx |
| Drilling Capacity In Steel | NO |
| Capacity | M3-M130 |
| Speed Control | Electronic |
| Speed | 11-450 RPM |
| Max Pressure | 200 Kg /cm2 |
| Motor | 10.5 HP |
| Voltage | 380/400/415 3 Phase |
| Arm Length | 1000 mm |
| Quick Change Chuck | N. 2-1 |
| Oil Tank | 50 Ltr |
| Weight | 1300 Kg. |
This model has an additional device to put the tapping head in horizontal position. To change from vertical position to horizontal and the other way around takes about 15 min.
Tapping Capacity:.
Serial Equipment:
*Your information is safe with us.
| Minimum Order Quantity | 1 Piece |
| Drilling Capacity In Steel | not Applicable |
| Air Flow (l/min) | 935 lt/min |
| Material | Hard Material |
| Power Source | Air |
| Air Pressure | 7 Kg./Cm2 |
| Tapping Capacity | M20 |
| Model Number | GN20 |
| Cutting Depth (mm) | Depends on Material Sizes |
| Layout | Vertical |
| Weight (kg) | 31 KG |
| Working Stroke | R. Min. 200 Max 1900 mm |
| Automation Grade | Semi-Automatic |
| Spindle Speed (RPM) | 150/400 |
| Dimension (mm) | Box |
| Working Stroke (mm) | R. Max.1950mm & R. MIn.200mm |
| Minimum Order Quantity | 1 Piece |
| Material | Steel |
| Capacity | 24 |
| Max Force Or Load | 24mm |
| Speed Control | Electronic |
| Speed | 120 380 RPM |
| Max Pressure Range | 140 Kg /cm2 |
| Electric Motor | 5.5 HP |
| Voltage | 220 V- 415 V |
| Arm Length | 650 mm |
| Tapping Holders | Quick Change 31 |
| Oil Deposit | 40 Ltr |
| Weight | 300 Kg |
| Brand | GAMOR |
gamor is a reputed name amongst the most trusted company in this domain, engaged in offering hydraulic tapping machines vertical model. these hydraulic machines are known for their high durability, sturdy construction, high functionality, less maintenance and less power consumption. Clients can buy these machines from us at industrial leading rates.
descriptionrhg-m24 (m4-m24)
| Minimum Order Quantity | 1 Piece |
| Material | Steel |
| Max Force Or Load | 60 |
| Capacity | M3-M60 |
| Speed | 22 to 500 RPM |
| Max Pressure | 200 Kg /cm2 |
| Motor | 10.5 HP |
| Voltage | 380/415 3 Phase |
| Arm Length | 750 mm. or 1000 mm as per Requirement & Cost |
| Quick Change Chuck | 4 |
| Oil Tank | 60 Ltr |
| Weight | 850 Kg. |
*Your information is safe with us.
| Minimum Order Quantity | 1 Piece |
| Material | Steel |
| Max Force Or Load | M39 |
| Capacity | M2-M39 |
| Speed Control | Electronic |
| Speed | 22 - 630 RPM |
| Max Pressure | 160 Kg /cm2 |
| Voltage | 380/415/440V-III-50/60hz |
| Arm Length | 750 mm. |
| Quick Change Chuck | N 231mm |
| Oil Tank | 50 Ltr |
| Weight | 530 Kg. |
| Minimum Order Quantity | 1 Piece |
| Working Stroke | 1275 mm Max |
| Drilling Capacity In Steel | NO |
| Capacity | M2-M16 |
| Speed Control | Arm Length 650 Mm. |
| Speed | 120 to 570 RPM |
| Nm | 56 |
| Max Pressure Range | 140 Kg /cm2 |
| Electric Motor | 5.5 HP |
| Voltage | 220 V-II - 380/415 VIII |
| Arm Length | 650 Mm. |
| Tapping Holders | Quick Change 31 |
| Oil Deposit | 40 Liters |
| Weight | 300 Kg. |
| Brand | GAMOR |
| Minimum Order Quantity | 1 Piece |
| Working Stroke | 300 min and 1900 mm Max R |
| Drilling Capacity In Steel | No |
| Automation Grade | Semi-Automatic |
| Functions | Tapping |
| Layout | Vertical & Horizontal |
| Max Hole Diameter | <50 mm |
| Working Stroke (mm) | R.Max 1900mm & R.Min 200Mm |
| Weight (kg) | 18 Kg |
| Spindle Speed (RPM) | 400 RPM |
| Tapping Capacity | M12 |
| Power Source | Air |
| Model Number | GN12 M3- M12 |
| Air Flow (l/min) | 840 lt/min |
| Cutting Depth (mm) | Depends on material & Size |
| Dimension (mm) | Carton Box |
| Material | Hard Metal |
| Air Pressure | 7 Kg./cm2 |
*Your information is safe with us.
| Minimum Order Quantity | 1 Piece |
| Working Stroke | max 1410mm |
| Drilling Capacity In Steel | No |
| Hole Diameter | M45 |
| Number Of Shaft | 1 |
| Material | All |
| Automation Grade | Semi-Automatic |
| Layout | Both |
| Max Hole Diameter | <50 mm |
| Working Stroke (mm) | 1450 |
| Functions | Tapping |
| Speed (rpm) | 15 to 590 |
| Series Type | Vertical Horizontal |
| Packaging Type | Wooden |
| Packaging Size | Mm |
| Capacity | M2-M45 |
| Electric Motor (hp) | 7.5 HP |
| Tapping Capacity | M45 |
| Weight (kg) | 590 |
| Model No. | MTC M45 |
| Voltage (V) | 415 |
| Sliding bars (mm) | 3 |
| Speed Control | Electronic |
| Table Work Area | 900x630 |
| Oil Tank (L) | 50 |
| Threading Operation | Internal |
| Size (mm) | 45 |
| Speed | 15 - 590 RPM |
| Max Pressure | 200 Kg /cm2 |
| Voltage | 380 3 Phase |
| Arm Length | 1000 mm |
| Tapping Chuck | 3-2-1 |
| Oil Deposit | 50 Ltr |
| Weight | 570 Kg / 590 kg |
we are specialized in providing superior quality array of hydraulic tapping machines. These machines are highly demanded in market for their rigid construction, optimum service life and trouble free performance.
metric system: m2-m45
whitworth system: bsw 1/8 – 1′ 3/4
bsp 1/8 – 2′ 1/4
capacity: m2-m45
r. P. M. : 15 a 590
maximum pressure: 200 kg /cm²
electric motor: 7,5 cv
voltage :380 threephase
speed control: electronicç
arm length: 1000mm
covering work table: total
tapping chucks: n. º 3-2-1
oil deposit: 50 liters
weight: 570 kg / 590 kg
tap arm with 3 sliding bars
worktable with t-from canals 900 x 630 mm.
speed variator (in hz)
digital (r. P. M. )left and right tapcontrol
hydraulic group
hydraulic motor
speed reducer
security tapping system
sideguard for chucks
hydraulic pressure manometer
pressure regulator
safety button for manometer
oil temperature indicator
level silemblocs
guided furrow with self compensation to tap close to the ground.
mechanic positioner for horizontal tapping.
| Minimum Order Quantity | 1 Piece |
| Working Stroke | R.Min,200mm Max.1900 mm |
| Drilling Capacity In Steel | No |
| Hole Diameter | 5-24 |
| Number Of Shaft | 1 |
| Automation Grade | Semi-Automatic |
| Functions | Tapping |
| Layout | Vertical & Horizontal |
| Max Hole Diameter | <50 mm |
| Working Stroke (mm) | R.Max.1950mm & R.Min.200mm |
| Weight (kg) | 34 Kg |
| Spindle Speed (RPM) | 70/220 |
| Tapping Capacity | M24 |
| Power Source | Air |
| Model Number | GN24 M5-M24 |
| Air Flow (l/min) | 935 Lt/min. |
| Cutting Depth (mm) | Depends on material sizes |
| Dimension (mm) | Box |
| Material | SS Material |
| Air Pressure | 7 Kg /cm,2 |
| Minimum Order Quantity | 1 Piece |
| Working Stroke | 1900mm Max |
| Drilling Capacity In Steel | NO |
| Hole Diameter | 0-25 mm |
| Number Of Shaft | 1 |
| Automation Grade | Semi-Automatic |
| Functions | Tapping |
| Working Stroke (mm) | 1900mm |
| Weight (kg) | 20 |
| Spindle Speed (RPM) | 700 |
| Tapping Capacity | M2-M8 |
| Power Source | Air |
| Model Number | GN 08 |
| Air Flow (l/min) | 840 |
| Cutting Depth (mm) | 16mm |
| Dimension (mm) | Carton Box |
| Material | Hard Metal |
| Air Pressure | 7kg/cm2 |
*Your information is safe with us.
| Minimum Order Quantity | 1 Piece |
| Capacity | M130 |
| Material | All Materials as per HRC |
| Max Force Or Load | M130 |
| Color | Beige Blue |
| Automation Grade | Automatic |
| Layout | Horizontal |
| Working Stroke | 1610mm |
| Functions | Tapping |
| Motor | 10.5 Hp |
| Usage/Application | Tapping,Mass Production |
| Cycle Time | seconds Minutes depends on Material |
| Voltage | 415 Volts |
| Magnetic Iron Separator | No |
| Table Size | 1200x800 mm |
| Tool Holder | 60 mm |
We have carved a niche amongst the most trusted names in this domain, we are eminent in offering Hydraulic Tapping Machines. Our product range is also known as Vitoria RHG-M130 (M3-M130) vertical. We are the World Leader in Manufacturing Tapping Machine with Capacity M130. This machine is manufactured by using quality tested components as per the set industrial norms.
The Machine Is Like The Model Vitoria RHG-M130 (M3-M130) But With Specific Options For Thread Cutting In Struts Or Similar Complicated Parts.
Equipment:
Tapping Machine With Hydraulic Tensioner, External Cooling And Discharge Chip Conveyor (Hydraulic Power Pack With 2 Motors)
Tapping head with reduction gear, guide arm with 4 slide bars in SKF bearings, cast iron table 1200x800mm with T-slots, solid side table 90º 800x600mm, Hydraulic group with 2 electric motors, hydraulic motor, hydraulic lifting column frequence variator for speed control, tapping security system, digital revolution display RPM, hydraulic pressure control knob, hydraulic pressure manometer, gauge safety rotary knob, tool holder 60mm, oil temperature gauge, oil level indicator, Silemblock leveling jacks, Mechanical depth detector, external tool cooling system with two pumps and extra fluid cooler, chip conveyor with coolant pump and dump ton, hydraulic vise with two jaws.
| Minimum Order Quantity | 1 Piece |
| Material | Steel |
| Max Force Or Load | M60 |
| Capacity | M3-M60 |
| Speed Control | Electronic |
| Speed | 20 to 500 RPM |
| Max Pressure | 200 Kg /cm2 |
| Electric Motor | 10 HP |
| Voltage | 380/415/440V-III-50/60hz |
| Sliding Bars | 1000 mm |
| Quick Change Chuck | 460mm |
| Oil Tank | 60 Ltr |
| Weight | 850 Kg. |
Tapping Capacity:
Serial Equipment:
| Minimum Order Quantity | 1 Piece |
| Material | Steel |
| Max Force Or Load | 45 |
| Capacity | M2-M45 |
| Speed | 15 to 590 RPM |
| Max Pressure | 200 Kg /cm2 |
| Electric Motor | 7.5 HP |
| Voltage | 380V |
| Arm Length | 1000 mm. |
| Holders No | 3-2-1 |
| Oil Tank | 50 Liters |
| Weight | 570 Kg / 590 Kg |
We are Bringing forth advance technology in providing supreme quality range of Hydraulic Tapping Machines. These machines are highly demanded in market for their rigid construction and hassle free performance. Furthermore, these Hydraulic Tapping Machines are available in different models.
Standard Equipment:
*Your information is safe with us.
| Minimum Order Quantity | 1 Piece |
| Material | Steel |
| Max Force Or Load | 20 |
| Capacity | M3-M20 |
| Speed Control | Electronic |
| Speed | 180 - 480 RPM |
| Max Pressure | 160 Kg /cm2 |
| Motor | 5.5 CV |
| Voltage | 380/415/440V-III-50/60hz |
| Arm Length | 550 mm |
| Quick Change Chuck | N. 231mm |
| Weight | 325 Kg |
| Oil Tank | 40 Ltr |
We are a leading company name in between the most dominant names in this business, engaged in providing Hydraulic Tapping Machines. Our Hydraulic Tapping Machines are available in different sizes, ranges, standards and models as per the customer’s specifications and requirements.
Basic Equipment:
| Minimum Order Quantity | 1 Piece |
| Material | Steel |
| Max Force Or Load | M20 |
| Capacity | M3-M20 |
| Speed Control | Electronic |
| Speed | 160 - 480 RPM |
| Weight | 300 kg |
| Nm | 152 |
| Max Pressure Range | 140 Kg /cm2 |
| Electric Motor | 5.5 HP |
| Voltage | 220 V-II - 380/415 VIII |
| Arm Length | 650 mm. |
| Tapping Holders | Quick Change 31 |
| Oil Deposit | 40 Ltr |
| Minimum Order Quantity | 1 Piece |
| Material | Steel |
| Max Force Or Load | M45 |
| Capacity | M2-M45 |
| Speed Control | Electronic |
| Speed | 150/590 RPM |
| Max Pressure | 200 Kg /cm2 |
| Electric Motor | 7.5 HP |
| Voltage | 220 Mono Phase / 380 Tri Phase |
| Arm Length | 1000 mm. |
| Taping | CHU: N.Deg 3-2-1 |
| Oil Tank | 50 Ltr |
| Weight | 550 kg |
Tapping Of Materials With M45
Tapping Capacity:
Basic Equipment:
*Your information is safe with us.
| Minimum Order Quantity | 1 Piece |
| Material | Steel |
| Max Force Or Load | 30 |
| Capacity | M2-M30 |
| Speed Control | Electronic |
| Speed | 22 to 630 RPM |
| Max Pressure | 140 Kg /cm2 |
| Motror | 3 Phase / 2.2KW |
| Voltage | 400V-III-50HZ |
| Sliding Bars Length | 750 Mm |
| Quick Change Chuck | N 2 31mm |
| Oil Tank | 50 Litr |
| Weight | 450 Kg |
Tapping Capacity:
| Hole Diameter | 3-16 mm |
| Number Of Shaft | 1 |
| Material | Mild Steel |
| Capacity | M16 |
| Speed | 200 - 570 RPM |
| Max Pressure | 160 Kg /cm2 |
| Motor | 5.5 HP |
| Voltage | 380/415/440V |
| Arm Length | 550 mm |
| Quick Change Chuck | N. 231mm |
| Oil Tank | 40 L |
| Weight | 325 kg |
We are a prominent name in between the leading companies, engaged in providing Hydraulic Tapping Machines. These Hydraulic Tapping Machines are known for their Quality, Durability, Excellence in performance. Clients can purchase these machines from us at industrial leading prices.
Tapping Capacity:
Basic Equipment:
| Minimum Order Quantity | 1 Piece |
| Working Stroke | Min 350 Max1410 |
| Drilling Capacity In Steel | No |
| Capacity | M3-M130 |
| Oil Tank | 50 Ltr |
| Weight | 1300 Kg. |
| Speed | 11-450 RPM |
| Max Pressure | 200 Kg /cm2 |
| Motor | 10.5 HP |
| Voltage | 380/400/415 3 Phase |
| Speed Control | Electronic |
| Arm Length | 1000 mm |
| Quick Change Chuck | N. 2-1 |
Matching up with the ever increasing requirements of the clients, we are offering standard quality array of Hydraulic tapping machines. We are world leader in manufacturing hydraulic tapping upto m130. Our product range is also known as Vitoria RHG-M130-VH (M3-M130) horizontal. These horizontal Hydraulic Machines are extensively used in different industries for tapping of different materials.
This model has an additional device to put the tapping head in horizontal position. To change from vertical position to horizontal and the other way around takes about 15 min.
Serial Equipment:
*Your information is safe with us.
| Minimum Order Quantity | 1 Piece |
| Layout | Vertical |
| Working Stroke | R max 1200 |
| Usage/Application | Tapping in Stainless Steel |
| Motor Wattage | 1200W |
| Tapping Speed In Aluminium | Yes Possible |
| Automation Grade | Semi-Automatic |
| Table Working Surface | Tapping |
| Drilling Capacity In Steel | No |
| Hole Diameter | M8-M45 |
| Model Name/Number | REV M45 |
| Voltage | 230V |
| Cycle Time | Depends on Material |
| Piller Length | No |
| Approx. Weight | 105 Kg |
| Size | M8-M45 |
| Magnetic Iron Separator | No |
| Number Of Shaft | 1 |
| Power | Electric |
| Spindle Travel | 0-50 and 0-250 RPM |
| Material | Both |
| Functions | Tapping |
| Material | SS and MS |
| Functions | Tapping |
| Automation Grade | Automatic |
| Max Hole Diameter | <50 mm |
| Layout | Vertical |
| Voltage | 230 V |
| Tapping Capacity | M12 |
| Motor | 600 W |
| Usage/Application | Tapping |
| Approx. Weight | 30 Kg |
| Power | Electric |
| Working Radius | 1100 mm |
| Size | M12 |
| Magnetic Iron Separator | No |
| Model Number | RE M12 |
The Elecrical Tapping Arms GOTAP, have been designed as Auxiliary Machines for Threading and Countersink, in an easy and Simple Way. Thanks to its tactile screen, which allows programming the Speeds of the Taps, in addition to making automatic threading specified depths, thread count & Threaded by stage.
| Minimum Order Quantity | 1 Piece |
| Working Stroke | R Max 1100 mm |
| Drilling Capacity In Steel | No |
| Functions | Tapping |
| Automation Grade | Semi-Automatic |
| Layout | Vertical |
| Voltage | 230V |
| Usage/Application | Tapping on Stainless steel materail |
*Your information is safe with us.
| Minimum Order Quantity | 1 Piece |
| Working Stroke | 1100 MM R Max |
| Drilling Capacity In Steel | No |
| Functions | Tapping |
| Automation Grade | Automatic, Manual |
| Layout | Vertical |
| Voltage | 230V |
| Usage/Application | Tapping |
| Approx. Weight | 41KG |
| Torque | 240NM |
| Technical Characteristics: | |||||
| TAPPING CAPACITY: | M6-M27 | ||||
| SPEED: | 0 - 200 R.P.M | ||||
| TORQUE | 240 NM | ||||
| POWER SUPPLY: | 230V 50HZ | ||||
| CONSUMPTION OF MOTOR : | 1200 W | ||||
| WEIGHT OF THE MACHINE: | 41 KG. | ||||
| RADIUS WORK AREA: | Height 700mm, R.máx. 1,100mm | ||||
| Quick Change Adapter size | 31 mm | ||||
| Minimum Order Quantity | 1 Piece |
| Working Stroke | 1100MM R MAX |
| Functions | Tapping |
| Automation Grade | Automatic, Manual |
| Layout | Horizontal |
| Voltage | 230V |
| Usage/Application | Tapping |
| Approx. Weight | 26kg |
| Torque | 31NM |
| Chuck Size | 1B |
| Power | Single Phase |
| Working Radius | 1100mm |
| Magnetic Iron Separator | No |
| Technical Characteristics: | |||||
| TAPPING CAPACITY: | M2-M12 | ||||
| SPEED: | 0 - 1000 R.P.M | ||||
| TORQUE | 91 NM | ||||
| POWER SUPPLY: | 230V 50HZ | ||||
| CONSUMPTION OF MOTOR : | 600 W | ||||
| WEIGHT OF THE MACHINE: | 26 KG. | ||||
| RADIUS WORK AREA: | Height 600mm, R.máx. 1,100mm | ||||
| Quick Change Adapter size | 19 mm | ||||
| Minimum Order Quantity | 1 Piece |
| Layout | Horizontal |
| Approx. Weight | 18kg |
| Chuck Size | 1B |
| Tapping Speed In Aluminium | 700rpm |
| Functions | Tapping |
| Hole Diameter | 8mm |
| Working Radius | 1900mm |
| Min. No. Of Strokes | 1 |
| Number Of Shaft | 1 |
| Forward Speed | 700rpm |
| Table Working Surface | 1900mm |
| Motor Wattage | Pneumatic |
| Automation Grade | Manual |
| Usage/Application | Tapping |
| Reverse Speed | 700rpm |
| Drilling Capacity In Steel | Tapping |
| Torque | 13NM |
| Type | Quick Change |
| Voltage | Pneumatic |
| Hydraulic Pressure | Pneumatic |
| Working Stroke | 1900mm |
| Material | Mild Steel |
| Technical Characteristics: | |||||
| TAPPING CAPACITY: | M2-M8 | ||||
| SPEED: | 700 R.P.M | ||||
| TORQUE | 12 Nm | ||||
| REQUIRED AIR PRESSURE: | 7 bar, 840 lt/min | ||||
| WEIGHT OF THE MACHINE: | 18 KG | ||||
| RADIUS WORK AREA: | R.min. 330mm, R.máx. 1900Mm | ||||
| LUBRIFICATION OF THE MOTOR: | ISO VG 32 or similar | ||||
| SERIAL EQUIPMENT: | |||||
| Pneumatic motor | |||||
| Reinforced arm structure of hard aluminium (parallelogram) | |||||
| Table attachment column | |||||
| Air filtration and motor lubrification unit | |||||
| Tap-holder quick change chuck Ø19 | |||||
*Your information is safe with us.
| Minimum Order Quantity | 1 Piece |
| Material | Steel |
| Max Force Or Load | M110 |
| Capacity | M3-M110 |
| Speed Control | Electronic |
| Speed | 15-480 RPM |
| Max Pressure | 260 Kg /cm2 |
| Motor | 10 HP |
| Voltage | 380/400/415 3 Phases |
| Arm Length | 750 mm. / 1000 mm |
| Quick Change Chuck | N. 2-1 |
| Oil Tank | 50 Ltr |
| Weight | 1300 Kg |
We bring forth our rich industrial experience and expertise knowledge, we are instrumental in providing Hydraulic Machines. Our Hydraulic Tapping Machine is basically a Vitoria RHG-M110 (M3-M110) vertical machine.
| Minimum Order Quantity | 1 Piece |
| Size | M39 |
| Material Grade | SS |
| Head Shape | Round |
| Head Type | Hydraulic motor |
| Thread Style | Full Thread |
| Drive Type | Hydraulic |
| Capacity | M2-M39 |
| Speed Control | Electronic |
| Speed | 22 a 630 / 30 a 890(plus) |
| Nm | 490 / 3410 (plus) |
| Max Pressure Range | 160 Kg /cm2 |
| Electric Motor | 5.5 Kw |
| Voltage | 220 V / 380 V 3 Phase |
| Arm Length | 750 mm. |
| Tapping Chuck | Quick Change 31 |
| Oil Deposit | 50 Liters |
| Weight | 460 Kg / 470 Kg (plus) |
Basic Equipment: