GA-MOR Machines Tools Private Limited
Mahadevapura, Bengaluru, Karnataka
GST No. 29AACCG9374L1ZW
08048970028 91% Response Rate
Send E-mail
- Home
- »
- Our Products
- »
- Pneumatic AIR Tapping Machines
| Minimum Order Quantity | 1 Piece |
| Color | Meroon and Black |
| Automation Grade | Semi-Automatic |
| Layout | Both |
| Max Hole Diameter | <50 mm |
| Working Stroke | R 1900 mm |
| Drilling Capacity In Steel | NA |
| Working Stroke (mm) | 1950mm |
| Functions | Tapping |
| Weight (kg) | 34 |
| Spindle Speed (RPM) | 70/220 |
| Usage/Application | Tapping |
| Power Source | Air |
| Model Number | GN24 M5-M24 |
| Air Flow (l/min) | 935 |
| Cutting Depth (mm) | Depends on material |
| Dimension (mm) | M24 |
| Material | SS |
| Air Pressure | 9Kg/Cm2 |
| Minimum Order Quantity | 1 Piece |
| Working Stroke (mm) | 1900mm |
| Color | Merron and Black |
| Functions | Tapping |
| Working Stroke | MIn 300mm Max 1900 mm |
| Drilling Capacity In Steel (mm) | only Tapping, No |
| Weight (kg) | 18 |
| Spindle Speed (RPM) | 400 |
| Voltage (V) | NA |
| Tapping Capacity | M12 |
| Motor (hp) | NA |
| Power Source | AIR |
| Cycle Time (Output per hr.) | Depends on Depth and material |
| Model Number | GN12 M3- M12 |
| Air Flow (l/min) | 840 |
| Spindle Travel (mm) | Tapping |
| Cutting Depth (mm) | Depends on material |
| Approx. Weight (kg) | 18 |
| Floor Area Space (mm) | 1900 to 200mm |
| Torque (Nm) | 33 |
| Chuck Size (mm) | 1B |
| Hydraulic Pressure (kg per square cm) | 7 Kg/Cm2 |
| Working Radius (mm) | R.1900 to R.Min.200 |
| Spindle Taper | 1 |
| Tapping Speed In Aluminium (mm) | depends on material & depth |
| Power (W) | Air |
| Type | Safety clutch |
| Dimension (mm) | 12 |
| Material | MS, SS, CI, etc |
| Air Pressure | 7 Kg/cm2 |
| Spindle Travel | Depends on Material |
| Automation Grade | Semi-Automatic |
| Layout | Vertical |
| Minimum Order Quantity | 1 Piece |
| Hole Diameter | 0-25 mm |
| Number Of Shaft | 1 |
| Material | Stainless Steel |
| Automation Grade | Semi-Automatic |
| Working Stroke | 1900mm |
| Drilling Capacity In Steel | NA |
| Functions | Tapping |
| Max Hole Diameter | <50 mm |
| Voltage | Air |
| Usage/Application | Tapping |
| Model Number | GN20 M4-M20 |
*Your information is safe with us.
| Minimum Order Quantity | 1 Piece |
| Automation Grade | Semi-Automatic |
| Functions | Tapping |
| Layout | Both |
| Max Hole Diameter | <50 mm |
| Drilling Capacity In Steel | NO |
| Working Stroke | Max.1400 mm |
| Weight | 20 Kg |
| Spindle Speed | 300 RPM |
| Tapping Capacity | M16 |
| Power Source | Air |
| Model Name/Number | GN, GN16. From M3 to M16 |
| Air Flow | 935 lt/Min |
| Cutting Depth | depends onMaterial |
| Material | MS SS |
| Air Pressure | Pressure 7 Kg/cm2 |
Pneumatic engine GAMOR, serie A.
Reinforced arm structure of hard aluminum (parallelogram).
Table attachment column.
Air filter.
Tapping chuck 31.
Set of 6 tap holders with safety clutch for M5, M6, M8, M10, M12, M16.
CAPACITY M3-M16
SPEED 300 RPM
WORK RANGE max 1400mm - min 200mm
WORKING PRESSURE 7 bar - 840 lt/min
WEIGHT 16 Kg.
Vertical / Horizontal tapping.
Mooring magnet.
Tap cooling equipment.
Centring device magnet.
| Minimum Order Quantity | 1 Piece |
| Working Stroke | 1900mm |
| Drilling Capacity In Steel | No |
| Functions | Tapping |
| Automation Grade | Semi-Automatic |
| Layout | Vertical |
| Voltage | Air |
| Usage/Application | Tapping |
| Cycle Time | Seconds and depends on Material |
| Spindle Travel | Depends on Depth |
| Approx. Weight | 18 |
| Forward Speed | varies on Size |
| Reverse Speed | Varies on size |
| Model Name/Number | GN-M12 |
| Hole Diameter | 3-16 mm |
| Number Of Shaft | 1 |
| Automation Grade | Semi-Automatic |
| Functions | Tapping |
| Max Hole Diameter | <50 mm |
| Working Stroke | R. Max 1400mm & R.Min 200mm. |
| Weight | 20 kg |
| Spindle Speed | 300 RPM |
| Tapping Capacity | M16 |
| Model Number | GN16 (M3-M16) |
| Air Flow | 935 L/Min |
| Torque (Nm) | 54nm |
| Working Radius (mm) | 1400mm |
| Size | M16 |
| Brand | Gamor |
| Dimension | Carton Box |
| Material | SS and MS |
| Air Pressure | 7 kg/cm2 |
Pneumatic engine GAMOR, serie A.
Reinforced arm structure of hard aluminum (parallelogram).
Table attachment column.
Air filter.
Tapping chuck 31.
Set of 6 tap holders with safety clutch for M5, M6, M8, M10, M12, M16.
CAPACITY M3-M16
SPEED 300 RPM
WORK RANGE max 1400mm - min 200mm
WORKING PRESSURE 7 bar - 840 lt/min
WEIGTH 16 Kg.
Vertical / Horizontal tapping.
Mooring magnet.
Tap cooling equipment.
Centring device magnet.