GA-MOR Machines Tools Private Limited
Mahadevapura, Bengaluru, Karnataka
GST No. 29AACCG9374L1ZW
08048970028 85% Response Rate
Send E-mail
- Home
- »
- Our Products
- »
- electric tapping machine
| Minimum Order Quantity | 1 Piece |
| Size | M2-M12 |
| Approx. Weight | 18kg |
| Material | All |
| Motor Wattage | Pneumatic |
| Chuck Size | 1B |
| Tapping Speed In Aluminium | 400mm |
| Layout | Vertical |
| Reverse Speed | 400rpm |
| Voltage | Pneumatic |
| Torque | 33nm |
| Type | Quick change |
| Usage/Application | Tapping |
| Floor Area Space | 1900mm |
| Working Stroke | 1900mm |
| Number Of Shaft | 1 |
| Table Working Surface | 1900mm |
| Power | Pneumatic |
| Working Radius | 1900mm |
| Automation Grade | Manual |
| Hole Diameter | 12mm |
| Drilling Capacity In Steel | Tapping |
| Functions | Tapping |
| Forward Speed | 400rpm |
| Technical Characteristics: | ||||||
| TAPPING CAPACITY: | M3-M12 | |||||
| SPEED: | 400 R.P.M. | |||||
| TORQUE | 32 Nm | |||||
| REQUIRED AIR PRESSURE: | 7 bar, 840 l/min | |||||
| WEIGHT OF THE MACHINE: | 20 KG. | |||||
| RADIUS WORK AREA: | R.min. 330mm, R.máx. 1900Mm | |||||
| LUBRIFICATION OF THE MOTOR: | ISO VG 32 or simmilar | |||||
| SERIAL EQUIPMENT: | ||||||
| Pneumatic motor | ||||||
| Reinforced arm structure of hard aluminium (parallelogram) | ||||||
| Table attachment column | ||||||
| Air filtration and motor lubrification unit | ||||||
| Tap-holder quick change chuck Ø19 | ||||||
| Minimum Order Quantity | 1 Piece |
| Floor Area Space | 1950mm |
| Torque | 90nm |
| Table Working Surface | 1950mm |
| Reverse Speed | 400rpm |
| Chuck Size | 2B |
| Tapping Speed In Aluminium | 400rpm |
| Usage/Application | Tapping |
| Drilling Capacity In Steel | Tapping |
| Voltage | Pneumatic |
| Forward Speed | 150rpm |
| Motor Wattage | Pneumatic |
| Approx. Weight | 31kg |
| Working Stroke | 1950mm |
| Hole Diameter | 20mm |
| Number Of Shaft | 1 |
| Material | All |
| Functions | Tapping |
| Automation Grade | Manual |
| Hydraulic Pressure | Pneumatic |
| Min. No. Of Strokes | 1 |
| Power | Pneumatic |
| Working Radius | 1950mm |
| Layout | Vertical |
| Type | Quick change |
| Technical Characteristics: | ||||||
| TAPPING CAPACITY: | M4-M20 | |||||
| SPEED: | 150/400 R.P.M. two speeds | |||||
| TORQUE | 90 Nm | |||||
| REQUIRED AIR PRESSURE: | 8 bar, 940 l/min | |||||
| WEIGHT OF THE MACHINE: | 40 KG. | |||||
| RADIUS WORK AREA: | R.min. 200mm, R.máx. 1900Mm | |||||
| LUBRIFICATION OF THE MOTOR: | ISO VG 32 or similar | |||||
| SERIAL EQUIPMENT: | ||||||
| Pneumatic motor | ||||||
| Reinforced arm structure of hard aluminium (parallelogram) | ||||||
| Table attachment column | ||||||
| Air filtration and motor lubrification unit | ||||||
| Tap-holder quick change chuck Ø31 | ||||||
4.3/5
Reviewed by 31 Users
Most Relevant Reviews